Quick answer
To reset an LG washer: turn it off and unplug it (or switch off its breaker), hold POWER for 5 seconds, then START/PAUSE for 5 seconds, and plug it back in. That clears most glitches. If an error code comes back, follow that code’s own fix instead of resetting again.
LG publishes a full reset procedure, plus specific wait times for many error codes. This guide puts both together, and explains when a reset is the wrong move. For a specific code, start with our LG washer error codes list.
Safety first
Pull the plug, not the cord, and do it with dry hands. LG’s reset guide says not to reset the washer if it shows an error code such as AE, dE or CE, or if it’s physically damaged or leaking. Deal with the code or the leak first, and keep the washer unplugged if there’s water on the floor.
How to reset an LG washer in 3 steps
- Cut the power. Press POWER to turn the washer off, unplug it, and switch off its circuit breaker.
- Hold the buttons. With the power off, press and hold POWER for 5 seconds, then press and hold START/PAUSE for 5 seconds.
- Restore the power. Switch the breaker back on, plug the washer in and start the cycle again.
These steps follow LG’s reset guide. LG’s U.S. error code list uses a shorter version for the door lock (dE) and power failure (PF) codes: unplug the washer, hold START/PAUSE for 5 seconds, then plug it back in.
Quick restarts for common problems
| Problem | LG’s quick fix |
|---|---|
| Control panel frozen | Turn off, unplug for 1–2 minutes, plug back in and restart |
| Door stays locked after the cycle | Wait a few minutes, then unplug for 5 minutes and try again |
| Buttons do nothing and CL shows | Child Lock is on: hold the Child Lock button for 3 seconds |
| Power cut mid-cycle (PF) | Unplug, hold START/PAUSE for 5 seconds, restore power, retry |
Reset wait times by error code
For many codes, LG’s U.S. list tells you to unplug the washer for a set time before you try again. If the code comes back after that, LG says to request service.
| Unplug for | Codes | What the code means |
|---|---|---|
| 10 seconds | CE, PE, tE, HE, SE, dHE | Over-current, water level sensor, heating, heater, sensor and dry function errors |
| 60 seconds | FE, AE, Ed5, E80, nC, nE | Overfill, leak detected, board communication, NFC and Wi-Fi module errors |
| 5 minutes | LE | Motor locked: also reduce the load and remove any objects from the tub |
What each code means, and the rest of LG’s steps, are in our LG error codes list.
When a reset won’t help
- A reset clears the fault from the display, but it doesn’t fix the cause. If a code returns on the next cycle, fix what it points to.
- Drain, fill and balance codes need a real fix: see our OE, IE and UE guides.
- Don’t reset a washer that’s leaking, damaged, or showing AE, dE or CE, as LG’s guide warns. For CE and some others, LG’s U.S. list says to close the water tap and unplug the washer before you request service.
When to call a technician
Call LG support or a local pro if the washer won’t power on after a reset, if a code returns after the wait time and the fix for that code, or if the breaker trips. Tell the technician which codes you saw and what you already tried.
HomeAdvisor puts the average washing machine repair at $125–$450 (updated June 17, 2026). Check the warranty first and have your model number ready.
If the washer is old and the quote is high, our repair or replace guides help you decide.
LG washer reset FAQ
Is there a reset button on an LG washer?
There’s no dedicated reset button. LG’s reset uses the buttons you already have: with the washer unplugged, hold POWER for 5 seconds, then START/PAUSE for 5 seconds, and restore the power.
How long should I unplug an LG washer to reset it?
It depends on what you’re fixing. LG’s guide suggests 1–2 minutes for a frozen control panel and 5 minutes for a door that stays locked. For specific error codes, LG’s list gives waits from 10 seconds to 5 minutes (see the table above).
Should I reset my LG washer when it shows an error code?
Follow that code’s own steps first. LG’s reset guide says not to reset when the washer shows codes such as AE, dE or CE, or if it’s damaged or leaking. Some codes, like PF and dE in LG’s U.S. list, include a reset as part of their fix.
How do I turn off Child Lock on an LG washer?
If the display shows CL, LG says to press and hold the Child Lock button for 3 seconds. That switches it off, and the controls work again.
Will resetting my LG washer delete my settings?
LG’s reset guide doesn’t say it erases settings. The power reset clears the current fault so you can restart the cycle. If a code comes back after a reset, the cause is still there and needs fixing.
