Quick answer
An LG washer error code tells you which system stopped the cycle. The five you’ll see most are OE (won’t drain), IE (won’t fill), UE (unbalanced load), LE (motor locked or overloaded) and dE (door won’t lock). Many clear with the right fix and a power reset.
This guide covers LG front-load and top-load washers sold in the U.S. It follows LG’s own error code lists. Codes and meanings differ between front-loaders and top-loaders, so check which type you have. Older LG models may show a numeric code (like E03) instead of letters: the table lists those too.
Before you start: how to reset an LG washer
For most codes, LG’s first step is a power reset. For the door lock and power failure codes, LG adds the START/PAUSE step:
- Turn the washer off and unplug it, or switch off its breaker.
- While it’s unplugged, press and hold START/PAUSE for 5 seconds.
- Wait a moment, plug it back in and start the cycle again.
If the controls don’t respond at all and the display shows CL, Child Lock is on. LG says to press and hold the Child Lock button for 3 seconds to switch it off. More reset options in our LG reset guide.
Safety first
Unplug the washer before you open the drain pump filter, unscrew a hose or touch anything inside. For CE, AE, PE and heating codes that come back after a reset, LG says to close the water taps and unplug the washer before you request service. Don’t keep running it.
LG front-load washer error codes
From LG’s front-load error code list. Codes separated by slashes mean the same thing on different models.
| Code | What it means | What to do first |
|---|---|---|
| OE / E03 / E21 | Drain error: the washer can’t drain the wash water | Check the drain hose for kinks, clean the drain pump filter, cut back on detergent |
| IE / E02 / E10 | Water inlet error: the tub doesn’t fill in time | Open the faucet, straighten the hoses, clean the inlet filter, thaw frozen hoses |
| UE | Unbalanced load: laundry piled on one side | Redistribute the load, keep it to 2/3 of the drum, level the washer |
| LE | Lock error: the motor can’t turn the tub (overload or a foreign object) | Unplug for 5 minutes, reduce the load, remove coins or objects |
| dE / dE1 / E01 | Door can’t lock | Reset: unplug, hold START/PAUSE for 5 seconds, plug back in |
| dE2 / E30 | Door lock fault | Open and close the door firmly, then do the same reset |
| CE | Over-current in the electrical circuit | Unplug for 10 seconds; if it returns, close the tap, unplug and call service |
| FE / E04 / E12 | Water overfill | Check for extra water through the dispenser; unplug 60 seconds; run Quick 30 |
| PE / E33 | Water level sensor fault | Unplug for 10 seconds and restart; call service if it returns |
| PF | Power failure during the cycle | Unplug, hold START/PAUSE for 5 seconds, restore power, retry |
| tE | Heating error, usually the thermistor | Unplug 10 seconds, set spin to No Spin to drain, restart |
| HE | Heater error | Unplug 10 seconds and restart; call service if it returns |
| dHE | Dry function error (washer-dryers) | Unplug 10 seconds and restart; call service if it returns |
| SE | Sensor error | Unplug 10 seconds and restart; call service if it returns |
| AE | Leak detected: safety switch activated | Check the inlet hose for loose connections or cuts; unplug 60 seconds. To trace a leak, see washer leaking from the bottom |
| vS / uS / u5 | Vibration sensor issue | Press Start to resume; restart; call service if it returns |
| FF / u51 | Freeze warning: below 1°C (34°F) inside | Thaw with warm water, wait 1–2 hours, drain, run Rinse |
| Sud | Too many suds | Use less detergent, and HE detergent |
| OPn | Detergent drawer not fully closed | Push the drawer all the way in |
| Ed1–Ed4 | ezDispense detergent or softener pump fault | Check the product type, clear residue from the compartments |
| Ed5 / E80 | Communication error between control boards | Unplug 60 seconds and restart; call service if it returns |
| nC / nE / nF | NFC or Wi-Fi module problem | Unplug 60 seconds and restart; call service if it returns |
Not errors: status messages
| Code | What it means | What to do |
|---|---|---|
| CL | Child Lock is on | Hold the Child Lock button for 3 seconds |
| tcL | Reminder to run Tub Clean | Run Tub Clean with the drum empty; LG suggests monthly. See how to clean a front load washer |
| Cd | Cool Down after drying: tumbles the load for up to 4 hours to prevent wrinkles | Remove the clothes, or press START/PAUSE |
| dcL | ezDispense nozzle cleaning | Empty the compartments, fill with water to MAX; takes about 16 minutes |
LG top-load washer error codes
LG’s top-load list uses many of the same codes, with some differences:
| Code | What it means |
|---|---|
| IE | Water isn’t reaching the washer, or the pressure is too low |
| OE | The washer drains slowly or not at all |
| UE | Unbalanced load |
| dE | Lid latch problem |
| CE | Over-current in the electrical circuit |
| Sud | Too many suds |
| CL / tCL | Child Lock on / Tub Clean reminder |
LG’s top-load list also includes E6, dL, dR, FE, uB, PE, d3, tE and PF. Meanings can vary by model, so check those in your owner’s manual or on LG’s page for your model.
How to fix the most common LG codes
OE: washer won’t drain
- Check the drain hose for kinks or a crushed section, and straighten it.
- Unplug the washer, open the service cover at the bottom front, drain the leftover water through the small hose into a container, then twist out the drain pump filter and clean it with a toothbrush.
- If there were lots of suds, cut back on detergent.
- Test the house drain: LG suggests taking the hose out of the drain pipe and running a Spin cycle. If water drains fine, the drain pipe is clogged.
Full steps for any brand in our Washer Not Draining guide, and LG’s own OE guide. Step by step: LG Washer OE Error guide.
IE: washer won’t fill
- Check that the faucet is open (counterclockwise) and the supply hose is connected.
- Straighten any bent hose. LG notes that vibration can bend it while the washer runs.
- Clean the water supply filter at the end of the hose connection, removing rust, sand or stones.
- In winter, thaw a frozen hose with warm water no hotter than 50°C (122°F).
More in our Washer Not Filling guide and LG’s IE guide. Step by step: LG Washer IE Error guide.
UE: unbalanced load
- Take out items that aren’t suitable for the washer, and use the right cycle for blankets and jackets.
- Keep the load to about 2/3 of the drum, and spread it evenly.
- If you use laundry nets, LG says to fill each only 2/3 full and use 2–3 nets together rather than one big one.
- Make sure the washer is level.
See also our Washer Won’t Spin guide. Step by step: LG Washer UE Error guide.
LE: motor locked or overloaded
LG says LE appears when the tub can’t spin because of an overload or a foreign object. Unplug the washer for 5 minutes, reduce the load, use the Bedding cycle for heavy items and check the tub for coins or other objects. If LE keeps coming back with small loads, the motor needs a technician.
dE: door won’t lock
Close the door firmly and make sure nothing is caught in it. Then do LG’s reset: unplug the washer, hold START/PAUSE for 5 seconds, plug it back in and try again. If the lock still fails, it may need replacing. If the door will not open after a cycle instead, see our guide to a front load washer door that won’t open.
FF: freeze warning
FF means the temperature inside the washer dropped below 1°C (34°F) and water in the hoses may freeze. LG’s fix: pour warm water at 50–60°C (122–140°F) into the tub, wait 1–2 hours, drain it through the access cover and run a Rinse cycle. Thaw frozen inlet hoses and taps separately.
When to call a technician
Call LG support or a local pro if a code comes back after the steps above and a reset. LG specifically says to request service if CE, PE, FE, AE, tE, HE or SE return, and to close the water taps and unplug the washer first for some of them.
HomeAdvisor puts the average washing machine repair at $125–$450, a drain pump at $300–$400, a water inlet valve at $95–$190, a door lock at $150–$400 and a motor at $320–$400 (updated June 17, 2026). Check the warranty first and have your model number ready.
If the washer is old and the quote is high, our repair or replace guides help you decide.
LG washer error code FAQ
How do I reset an LG washer?
For most codes, LG’s first step is to unplug the washer and wait. For door lock (dE) and power failure (PF) codes, LG adds a step: while it’s unplugged, press and hold START/PAUSE for 5 seconds, then plug it back in and try again.
What does OE mean on an LG washer?
OE is LG’s drain error: the washer can’t drain the wash water. LG’s steps are to check the drain hose for kinks, clean the drain pump filter and cut back on detergent if there are too many suds.
What does UE mean on an LG washer?
UE means the load is unbalanced, with laundry piled on one side of the drum. Redistribute it, keep the load to about 2/3 of the drum and make sure the washer is level.
What is tcL on an LG washer?
tcL isn’t an error. It’s a reminder to run the Tub Clean cycle. LG suggests running it monthly with the drum empty.
Why does my LG washer say Sud?
Sud means the washer detected too many suds, and LG says it can add about 2 hours to the cycle. Use HE detergent and don’t go over the recommended amount.
