Quick answer
To reset a Samsung washer, unplug it (or switch off its breaker), wait 1 to 5 minutes and plug it back in. That clears electronic glitches and stored error codes. It won’t fix a real fault, so if the same code comes back, fix its cause instead of resetting again.
Samsung documents two kinds of reset for its washers: a power reset, which works on every model, and a network reset for Wi-Fi models. This guide also covers calibration, which resets how the washer senses weight, and the cases where a reset is the wrong move.
Steps follow Samsung’s U.S. guide to resetting a washer. If your washer is showing a code, look it up first in our Samsung washer error codes list.
Which reset do you need?
| Reset | Use it when | Works on | Time |
|---|---|---|---|
| Power reset | The display freezes, buttons don’t respond, or you’ve fixed the cause of an error code | All models | 1–5 minutes |
| Network reset | The washer won’t connect to Wi-Fi or the SmartThings app | Wi-Fi models | About 1 minute |
| Calibration | UB errors or poor spinning with normal, balanced loads | Models with calibration mode (Cb) | 1–3 minutes |
| Child Lock off | Buttons do nothing and CL or a lock icon shows | Models with Child Lock | Under a minute |
Safety first
Unplug the washer with dry hands and pull the plug, not the cord. If the outlet is hard to reach, switch off the washer’s breaker instead of dragging a machine full of water. Don’t reset a washer that trips the breaker, smells of burning or sparks: leave it unplugged and call for service.
How to reset a Samsung washer (power reset)
Method 1: Unplug the washer
- Press Power to stop the cycle.
- Unplug the washer from the wall outlet.
- Wait at least 1 minute. Samsung’s U.S. guide says the charge usually clears in 1 to 5 minutes at most.
- Plug it back in, turn it on and start a cycle.
Method 2: Switch off the circuit breaker
- Find the breaker for the washer or laundry room in your electrical panel.
- Switch it off and wait 1 minute.
- Switch it back on, turn the washer on and start a cycle.
Samsung’s Canadian reset guide says both methods do the same thing, so use whichever is easier. If an error code comes back right away, the reset has done its job: the code is real, and the fix is in the guide for that code.
How to reset the Wi-Fi on a Samsung washer
- Press and hold Smart Control until AP appears on the display (about 3 seconds).
- Press and hold Temp until OK appears (about 7 seconds). The display goes back to AP.
- Turn the washer off.
This erases all of the washer’s Wi-Fi and network information. Reconnect it in the SmartThings app the next time you set it up.
How to recalibrate a Samsung washer
Calibration resets how the washer senses the weight of the load. Samsung recommends it in its guide for a washer that spins poorly.
- Take everything out of the drum.
- Press and hold Temp. and Delay End together for 3 seconds, until Cb appears.
- Press Start/Pause. The tub rotates back and forth for 1 to 3 minutes.
- The display shows En, End or 0 and the washer turns off.
If your model doesn’t have those buttons, the steps are in your user manual. For more on balance problems, see our Samsung Washer UB Error guide.
If the buttons don’t respond: check Child Lock
If the display shows CL or a lock icon and the buttons do nothing, Child Lock is probably on. Samsung’s fix for the CL code is to turn the washer off and on again, or switch Child Lock off. The button combination for Child Lock is printed on the control panel or listed in your manual.
Reset after a power outage (PF code)
If the power went out mid-cycle, your washer may show PF. Samsung’s U.S. error code list groups PF with its voltage errors and says it means the power supply was interrupted.
- Make sure the washer is plugged straight into a wall outlet on its own circuit. Samsung says not to use an extension cord.
- Do a power reset as described above, then restart the cycle.
- If PF keeps coming back with no outage, contact Samsung support or an electrician to check the circuit.
When a reset won’t help
- A reset clears stored error codes, but Samsung notes it won’t fix the underlying issue.
- Don’t keep resetting. Samsung warns that each reset can erase the error history a technician uses to diagnose the problem.
- Codes like 4C, 5C and UB point to a water, drain or balance problem. Fix the cause with our 4C, 5C and UB guides, then reset if you still need to.
When to call a technician
Call Samsung support or a local pro if the washer won’t power on after a reset, if a code returns after you’ve fixed its cause, or if the breaker trips. Tell the technician which codes you saw and how many times you reset the washer.
HomeAdvisor puts the average washing machine repair at $125–$450 (updated June 17, 2026). Check whether the washer is still under warranty, and have your model number ready.
If the washer is old and the quote is high, our repair or replace guides help you decide.
Samsung washer reset FAQ
How long should I unplug a Samsung washer to reset it?
Samsung’s U.S. guide says the electrical charge usually clears in 1 to 5 minutes at most. Its Canadian guide uses 1 minute. Waiting the full 5 minutes is the safe choice if a shorter reset didn’t work.
Is there a reset button on a Samsung washer?
Samsung’s reset guides don’t use a reset button. The standard reset is to cut the power, by unplugging the washer or switching off its breaker. Wi-Fi models also have a network reset that uses the Smart Control and Temp buttons.
Will a reset clear the error code?
Yes, but only from the display. If the cause is still there, the code comes back on the next cycle. Samsung notes that a reset won’t fix the underlying issue.
How do I reset the Wi-Fi on my Samsung washer?
Hold Smart Control until AP appears (about 3 seconds), then hold Temp until OK appears (about 7 seconds). Turn the washer off. This erases its network settings, so reconnect it in the SmartThings app afterwards.
What does Cb mean on a Samsung washer?
Cb means the washer is in calibration mode, recalibrating how it senses the weight of the load. Samsung says to run it with the drum empty. It takes 1 to 3 minutes.
