Quick answer
A washer that shakes hard is almost always one of four things: shipping bolts still installed (front loaders), feet that are not level, a weak or soft floor, or an unbalanced load. Check them in that order. Expect 15–30 minutes, and most fixes need no parts.
A washing machine shaking violently is loud, but it is rarely broken. If the noise is a grinding, squealing or clicking sound rather than shaking, see our guide to a washer making loud noise when spinning. In most cases the machine is simply not sitting the way the manufacturer expects, or the clothes are bunched on one side of the drum during the spin.
This guide follows Samsung’s U.S. vibration guide, LG’s U.S. vibration page and Whirlpool’s product help. If the washer shows an unbalance code instead, see our Samsung UB guide or the LG UE guide.
What makes a washer shake
Work down this list in order. The first four cost nothing to check.
| Check order | Cause | Difficulty | Cost |
|---|---|---|---|
| 1 | Shipping bolts still installed (front load only) | Easy | $0 |
| 2 | Washer not level, or one foot off the floor | Easy | $0 |
| 3 | Soft carpet, a weak floor, or no gap around the washer | Medium | $0 to move; a vibration pad varies |
| 4 | Unbalanced load or a tiny load | Easy | $0 |
| 5 | Overloaded drum | Easy | $0 |
| 6 | Internal fault found by a technician | Hard | $125–$450 average repair |
The repair range comes from HomeAdvisor’s washing machine repair guide (updated June 17, 2026) and is a national average for all brands.
Shipping bolts are the first thing to check on any front loader that is new or was recently moved. They hold the drum still during transport, and all three brands say the washer vibrates badly if they stay in.
5 fixes for a washing machine shaking violently
Safety first
Unplug the washer before you reach behind it or tilt it. Washers are heavy, so get a second person if you need to move or tip the machine, and never put your hands under it while it is raised.
Fix 1: Remove the shipping bolts (10–20 minutes)
Top loaders do not have them, so skip this fix if yours is a top loader.
- Open the door and push the drum. LG says to move it forward and back: if it moves easily, the bolts are out. Samsung says a drum that feels rigid, with almost no give, still has them in.
- Use the wrench supplied with the washer to loosen each bolt at the back. Whirlpool specifies a 5/8-inch (16 mm) wrench.
- Slide each bolt and its spacer to the center of the hole, then pull them out. Samsung lists four bolts on most models, three on some, and seven on FlexWash models.
- Fill the holes with the plastic caps that came with the washer.
Samsung and LG say to keep the bolts for a future move. Whirlpool’s instructions say to discard them, so follow the manual for your brand. LG also mentions foam blocks under the tub on some new machines, which takes two people to tilt the washer and check.
Fix 2: Level the washer (15 minutes)
Tools: carpenter’s level, the wrench or a flat screwdriver for the lock nuts.
- Grip the top of the washer and rock it. Whirlpool says all four feet must touch the floor and the machine must not rock.
- Set a level on top. Turn the feet until it reads level side to side and front to back, as LG advises.
- Samsung says to turn a leg clockwise to raise a corner and counterclockwise to lower it, and to keep the legs as short as they can be.
- If only one corner wobbles, Samsung says to shorten the other three first. If they are already at their shortest, lengthen the wobbly one.
- Tighten the lock nuts on every foot. LG says to tighten the lock nuts on all four feet after any adjustment.

Fix 3: Check the floor and the gaps (10 minutes)
Samsung says the washer needs a stable floor that is free from damage, and it warns against soft surfaces such as carpet. It also asks for one inch of space between the washer and the dryer or any wall.
Whirlpool adds that a weak floor can make vibration worse. It suggests reinforcing the area or trying a washer vibration pad to absorb some of the movement.
Fix 4: Rebalance the load (5 minutes)
LG suggests filling the tub to about two thirds and spreading the clothes evenly. Samsung explains that a small load tends to bunch on one side of the drum. Add a few more items, or lower the spin speed. For heavy absorbent items such as sheets, stop the cycle and spread them out by hand. If the display shows an unbalanced-load code, see our Samsung UB error and LG UE error guides.
Avoid packing the drum. Whirlpool says clothes should move freely, with heavy pieces spread around lighter ones.
Fix 5: Run a test cycle (10 minutes)
Run a rinse and spin with a light load, as LG recommends, and stay close. If the washer still shakes hard, stop the cycle and go back to Fix 2 and recheck all four feet.
When to call a technician for a shaking washer
Call the manufacturer or a local pro if the washer still vibrates after all five fixes. Samsung and LG both say to request service at that point, and LG adds that an error code on the display is another reason.
HomeAdvisor puts the average washing machine repair at $125–$450 (updated June 17, 2026). Before you book, check the warranty. Whirlpool warns that leaving shipping bolts in can damage the machine and may void the warranty, so say what you already checked.
If the washer is old and the quote is high, our repair or replace guides can help you decide.
Washing Machine Shaking Violently FAQ
Why is my washer shaking violently during the spin cycle?
The spin is when any imbalance shows up. Check the shipping bolts on a front loader, level all four feet, and make sure the load is spread evenly.
Do top-load washers have shipping bolts?
Samsung says top-load models have none, so this fix applies to front loaders only.
Can I run the washer while it shakes?
It is better not to. Whirlpool says leftover shipping bolts can cause excessive vibration and damage the machine. Stop the cycle and fix the cause first.
Should I put a washer on a vibration pad?
Whirlpool suggests a pad when the floor is weak, but only after the washer is level. A pad will not cure an unlevel machine or bolts left in.
How do I know if the shaking is a real repair?
If it continues after the bolts, the feet, the floor and the load are all checked, treat it as a repair and contact the manufacturer.
